Merely because the “low ink” light appears on your copier doesn’t indicate you have to drain your wallet. Stop worrying and start refilling the laser printer cartridges yourself! In less than 10 minutes you can have it completed and save a bunch of dollars. Laser printer cartridges refill kits frequently come with the following things: ink in bottles, syringes for ink, and an in depth instruction sheet. Various kits can also have an air balance clip that is used to balance the air inside the cartridge to secure correct flow of ink. Many kits also include a tiny handheld drill so that you can drill a tiny hole in the tip of the cartridge.

Process for Refilling:

1. Fill the syringe with your choice of color ink. Make sure to spread out numerous sheets of scrap paper or cloth to avoid a mess. The quantity of ink the cartridge will hold will differ. Generally in Epson produced printers, the black ink cartridge holds approximately 17 ml. each and each color ink cartridges contain about 9 ml. You will want to make sure you read the information to verify how much ink your laser printer cartridges holds.

2. Drill a tiny hole at the top of the laser printer cartridges ahead of inserting the syringe, one hole for each color cartridge chamber. The hole ought to be at the top of the cartridge near the label. Gently force the syringe through the drilled hole and push to the bottom of the cartridge and just before the outlet hole. To get around having the ink foam, allow air to be introduced into the chamber by little by little filling each cartridge.

3. There is no need to re-seal the newly drilled refill holes because there are already manufactured breather holes on all laser printer cartridges.

4. If you have any extra ink, it should be returned to the bottle which it came from. It is vital that you scrub and dry every syringe carefully so that you might use them again later. You might also identify the syringes for every color so that every syringe is just utilized for one color.
5. As soon as you have positioned the laser printer cartridges back into the copier, be certain to run the printers cleaning cycle at least 1 to 3 times. If you see any gaps in the printing, be sure to run the cleaning cycle for a second time.

Remember…

There are numerous things one ought to keep in mind when refilling laser printer cartridges. Each cartridge ought to be refilled prior to the cartridge becoming empty to preclude the cartridges ink chamber from drying out which causes clogging. Also, it’s always a good idea to permit the cartridge sit for a few hours, or even overnight, so the stress in the cartridge can stabilize.

Some newer printers, such as those produced by Epson, have a computer chip in the laser printer cartridges which will be noticeable by simply looking at the cartridge. Those chips are frequently referred to as “Intellidge” cartridges. Those chips keep track of how the cartridge is used and notifies the computer when the laser printer cartridges become low or empty. Be certain to reset the chip when refilling the cartridge with ink from a refill kit. To reset the memory chips, there is a reset tool you can use. This will allow the copier to recognize the ink cartridge as “full” which allows printing with a refilled ink cartridge.